Call Now

Microwave · All brands

Microwave Repair in Washington, DC

Microwave repair in your home, condo or rental anywhere in DC, for every major brand. Same-day visits when the schedule allows.

Written estimate before work90-day parts & 30-day labor warrantySame-day when the schedule allowsIndependent, all major brands
(703) 956-1511

Or book online and we'll get back to you to set a visit window.

Schedule Your Repair

Four quick steps. We'll confirm a visit window with you, and you'll get a written estimate before any work starts.

1
2
3
4

Service Type

What type of service do you need?

Or call us directly:

(703) 956-1511
Written
Estimate Before Work
90-Day
Parts Warranty

Microwave Brands We Repair

Samsung appliance repairLG appliance repairWhirlpool appliance repairGE appliance repairMaytag appliance repairBosch appliance repairKitchenAid appliance repairFrigidaire appliance repairViking appliance repairKenmore appliance repairAmana appliance repairElectrolux appliance repairMiele appliance repairThermador appliance repairAdmiral appliance repairAvanti appliance repairBlomberg appliance repairDacor appliance repairFisher & Paykel appliance repairGaggenau appliance repairHotpoint appliance repairInsignia appliance repairJennAir appliance repairRoper appliance repairSharp appliance repairSmeg appliance repairThor appliance repair
Independent Local Repair

Repair Planned Around How Homes Here Are Built

WDC ProFix Repair fixes microwaves in rowhouses, apartments and detached homes in all four quadrants of the District. The technician tracks down the fault where the appliance stands, writes up the repair and the price for your approval, and finishes on the spot when the part is on hand. We work on Samsung, LG, Whirlpool, GE, Maytag, Bosch and the other brands listed below. We're an independent repair company, so if your microwave is still under the manufacturer's warranty, contact the manufacturer first. Repairs carry a 90-day parts and 30-day labor warranty.

Rowhouses & Conversions
Victorian rows with basement laundry, English-basement units, and condo conversions with closet washers upstairs.
Co-ops, Condos & Rentals
We work within service-elevator bookings, board rules and tenant access, and leave written notes for whoever pays.
Arrival Windows We Keep
You get a three-hour window we can actually make across DC traffic. A same-day slot is offered only when one is open.
Brands in DC Kitchens
Builder-grade GE and Whirlpool in older rows, Bosch and Samsung in newer condos, Sub-Zero and Wolf in renovated homes.
Price in Writing
The technician tests the appliance, names the failed part and puts the price on paper. You decide before any work begins.
Parts & Labor Covered
Parts we install carry 90 days and our labor 30 days. A repeat of the same fault in that time is ours to put right.
Independent Repair Company
Not a manufacturer warranty center; in-warranty units go to the maker first
Local Conditions
Muggy summers, storm outages and moderately hard Potomac water all factor into the diagnosis
Citywide Coverage
All four DC quadrants, plus Arlington and Alexandria, VA
Worth Fixing?
When the repair costs too much for an older unit, the technician says so before you spend anything

How It Works

01
Describe the Problem
Share the appliance, the brand and what it is or isn't doing
02
Pick a Time
We agree on a three-hour arrival window that suits your building
03
Find the Fault
Testing first, then a written price you approve or decline
04
Fix and Check
The repaired unit is run through a full cycle before we go

Washington, DC · Arlington · Alexandria

Ready to schedule your repair?

WDC ProFix Repair: independent, in-home appliance repair with a written estimate before any work starts.

Why Microwave Repair Starts With a Warning

A microwave plugs into an ordinary outlet, but inside it builds far higher voltage to power the magnetron, the tube that makes the microwaves. That charge sits in a high-voltage capacitor, which can stay energized for days with the cord pulled. Touching it can kill. For that reason, the only microwave checks an owner should make are outside the cabinet. Opening the case, testing the capacitor, the diode, the transformer or the magnetron is technician work, done with the unit unplugged and the capacitor safely discharged.

That applies equally to countertop models, over-the-range units mounted above a stove, built-in drawer microwaves and the microwave half of a combination wall oven.

The Path From Outlet to Hot Food

When you press start, the control board checks a set of door switches to confirm the door is fully latched. It then powers the high-voltage transformer, which together with the capacitor and diode feeds the magnetron. Microwaves travel through a waveguide into the cavity, where a turntable or a hidden stirrer spreads them around. A fan cools the magnetron, and a light lets you watch. Over-the-range units add a vent fan, a cooktop light and filters, all controlled from the same keypad.

Symptoms and the Usual Suspects

A microwave that runs, hums and turns the plate but does not heat is the classic complaint. The cause could be the magnetron, the high-voltage diode, the capacitor or the transformer, and only testing can tell which. A microwave that is completely dead may have blown an internal fuse, often because a door switch failed; the fuse is a sign, and the switch behind it should be checked too.

Sparking inside the cavity often comes from metal, foil trim on dishes, or a damaged waveguide cover, the small panel on the inside wall. Food splatter that burns onto that cover can arc and eventually damage the magnetron. A turntable that will not spin may have a worn coupler or a failed motor. A keypad that ignores certain buttons, or a display that is blank while the light still works, can point to a membrane or a board fault.

On over-the-range models, a vent fan that is loud or weak, or a light that has quit, is a separate system from the cooking side and usually a simpler fix.

Safe Things to Check From the Outside

Plug a lamp into the same outlet to confirm it has power, and check the breaker or GFCI. Open and close the door firmly a few times; a door that does not latch cleanly will not let the microwave start. Clean the inside, especially the waveguide cover, with a damp cloth and mild soap. Make sure the turntable sits on its coupler and roller ring properly.

On an over-the-range unit, take out the grease filters and wash them. If anything smells like burning, if you see sparks without metal inside, or if the door is bent or damaged, stop using it and unplug it. Do not take the cover off, even if the microwave has been unplugged for days.

How the Technician Diagnoses It

The technician confirms power and checks the door, the latch and its switches, since door switch faults are both common and a frequent cause of blown fuses. With the unit unplugged, the capacitor is discharged before the cabinet work begins. The fuse, diode, capacitor and transformer are tested in turn, and the magnetron is checked last on the high-voltage side. On over-the-range models, the vent motor, the light sockets and the mounting are also checked. Built-in units may need to be slid out of their trim kit first. You see the estimate in writing before the repair goes ahead.

Over-the-Range Microwaves in Small DC Kitchens

Washington's compact kitchens lean heavily on the over-the-range microwave. In rowhouse condo conversions, studio and one-bedroom units in Dupont and Logan, prewar co-ops along Connecticut Avenue and new towers in NoMa and The Wharf, a separate hood rarely fits, so the microwave doubles as the stove's ventilation. How that vent is set up matters. Many units in apartment buildings are set to recirculate, blowing air back into the kitchen through a charcoal filter, because there is no exhaust duct or the building does not allow one. Others vent into a shared building duct or out through a wall.

A recirculating unit needs its charcoal filter replaced periodically; a clogged one makes the fan sound strained and leaves cooking smells in the room. A unit vented into a shared duct depends on that duct and on any damper, which belong to the building. If the fan runs but nothing moves, management may need to look at the duct side. Building rules also affect the repair itself. A co-op board or condo manager may want advance notice, vendor paperwork or a booked service elevator, so ask what management requires before the visit.

Summer storms and the power blips that come with them are another reason microwaves fail. Their electronic controls are sensitive to surges. If the display goes dark after an outage, unplug the microwave for a minute or reset the breaker before calling. A countertop model can sit on a surge protector; an over-the-range unit usually plugs into an outlet inside the cabinet above it.

Tenants should know that a microwave the owner put in above the stove is, as a rule, the owner's job to fix. Tell your landlord or manager what is happening and leave the scheduling to them. Building staff also tend to know whether the vent above the unit ties into a shared duct, which can save the technician time.

Drawer, Built-In and Combination Units

Drawer microwaves sit below the counter and open like a drawer, using a motor and a set of slides instead of a hinged door. When the drawer will not open or close, the cause is often a jammed track or a weak drawer motor, not the cooking system at all. Built-in microwaves surrounded by a trim kit look like part of the cabinetry, but inside they are often a countertop design, and the trim has to come off before service. A combination wall oven, with a microwave above a conventional oven, shares cooling and sometimes controls between the two halves, so a fault in one can occasionally show up in the other.

These units take longer to remove and reinstall than a countertop model, and the technician will want the model number in advance.

Repair Versus Replacement

A small countertop microwave is often cheaper to replace than to repair, and the technician will say so if that is the case. Over-the-range and built-in units are a different calculation. Replacement means matching a mounting plate, a cabinet cutout or a trim kit, and installation takes time. Door switches, fuses, diodes, turntable motors, vent fans and light sockets are all good repair candidates. A failed magnetron or control board on an older unit is where the decision becomes closer.

Mounting is part of the job as well. An over-the-range microwave hangs from a wall plate and is bolted through the cabinet above, and it carries real weight. If yours sags at the front, the door drops or it shifts when you open it, mention that, because a loose mount strains the latch and switches and should be put right whatever else gets repaired.

Habits That Extend Its Life

Cover food to keep splatter off the waveguide cover, and wipe the cavity often. Never run the microwave empty, which sends energy back into the magnetron. Close the door gently; slamming it wears the latch and switches. On over-the-range units, run the vent fan whenever you cook on the stove below and clean the grease filters every month or so. Keep metal, foil and dishes with metallic trim out of the cavity.

FAQ

Microwave repair: common questions

Can't find your answer? Book a service call or call us now.

Still have questions?

Call or book online and ask us directly. We'll give you a straight answer.

Microwave problems we repair

Microwave Not Heating
Sparking Inside
Turntable Not Spinning
Door Won't Close / Open
Display Not Working
Making Loud Noise
Won't Start
Sparking Inside Microwave
Waveguide Cover Burned or Damaged
Door Switch Failure
Door Not Closing Properly
Door Handle Broken
Turntable Making Grinding Noise
Control Panel Not Responding
Runs with Door Open
Noisy During Operation
Cooling Fan Not Working
Burns Food Too Quickly
Microwave Won't Start
Interior Light Not Working
Over-Range Microwave Ventilation Poor
Grease Filter Clogged
Charcoal Filter Saturated
Error Code Displayed
Intermittent Heating
Microwave Runs but No Magnetron Power
Popping or Crackling Noise During Operation
Overheating and Shutting Off
Arcing from Metal Rack
Fan Running After Microwave Is Off
Some Display Digits Missing
Sparking from Turntable Tray Area
Food Heating Unevenly
Clicking Sounds After Cooking
Steam or Condensation Inside Microwave
Burning Plastic Smell from Microwave
Power Level Selection Not Working
Inverter Board Failure (Inverter Microwaves)
Interior Light Flickering
Microwave Tripping Circuit Breaker
Water or Moisture in Control Panel
Error Code Indicating Thermal Fault
Sensor Cooking Not Working Properly
Child Lock Won't Disable
Interior Cavity Coating Peeling
Ventilation Fan Motor Failure (Over-Range)
Arcing from Magnetron Antenna
Runs Only a Few Seconds Then Stops
Door Won't Latch Closed
Runs at Wrong Power Level
Keypad Buttons Sticking
Vent Damper Stuck Closed or Open
No Sound / No Beep
Display Shows Wrong Time After Power Outage
Grease Fire Risk — Heavy Grease Buildup
Door Window Cracked
Unusual Smell After Each Use
Humidity Sensor Not Working (Sensor Cook)
Door Seal / Gasket Damaged
Convection Mode Not Baking Properly
CallBook