Leases in Washington turn over constantly. Students move in near Georgetown, GW, Howard and Catholic every August, new jobs bring people to Navy Yard and NoMa towers, and plenty of English basement apartments change hands between semesters. The first day in a new place is the best time to find out whether the appliances work, because anything you notice now is clearly something you found, not something you caused.
When a landlord provides an appliance in DC, keeping it in working order generally falls to the landlord. That makes this checklist about two things: testing each appliance, and writing down what you find so the right person gets the request. Virginia law works much the same way for landlord-supplied appliances, so renters in Columbia Pike garden apartments or Old Town townhouses can use this checklist too.
Before You Start: Paperwork and Photos
- Get a copy of any move-in condition form the landlord or manager uses, and fill it out as you go.
- Take dated photos of each appliance, inside and out, including any dents, rust, missing shelves or cracked knobs.
- Photograph the model and serial labels. They let you check recalls at CPSC's recall site and help a technician bring the right parts.
- Ask who to contact for repairs and how. Some buildings use a portal, some a property manager, some the owner directly.
Refrigerator and Freezer
- Put an appliance thermometer in each section. Give it a few hours, then look for 40°F or colder on the fridge side and roughly 0°F in the freezer.
- Check the door gaskets for tears and gaps all the way around.
- Look under the crisper drawers and on the freezer floor for standing water or ice, a common sign of a blocked defrost drain.
- If there is an ice maker or water dispenser, make sure the water line is connected and turned on. Ask when the filter was last changed. Taste can vary through the year, especially in spring when DC Water briefly changes its disinfectant.
- Listen for grinding, loud clicking or a fan that sounds like it is hitting something.
Range, Oven and Cooktop
- Gas: each burner should light within a few seconds with a steady blue flame. Repeated clicking without lighting, yellow lazy flames or a gas smell need attention. Smell gas in a new apartment? Head out the door, do not work any switch on the way, and ring Washington Gas or 911 from out on the street.
- Electric: every element should heat evenly. Glass cooktops should have no cracks.
- Set the oven to 350°F and check with an oven thermometer after preheat.
- Confirm the range is anchored by its anti-tip bracket. Gently tilt the range forward; a secured range will not lift.
- Confirm that a carbon monoxide alarm is installed near sleeping areas in any unit with gas appliances. Our carbon monoxide checklist explains what else to look for.
Dishwasher
- Run an empty cycle. Watch the floor in front and the cabinet underneath the sink for drips.
- At the end, check for standing water in the bottom.
- Pull out the filter if the model has one; a previous tenant may never have cleaned it.
- Look at the spray arms for clogged holes. Hard water leaves white scale.
Microwave
- Heat a cup of water for a minute. It should be hot, the turntable should spin and the door should latch firmly.
- Sparks, a bent door or a damaged seal mean stop using it and report it. Microwaves store high voltage even when unplugged, so this is not a do-it-yourself repair.
Washer and Dryer
In-unit laundry in a condo conversion closet, a shared machine in a rowhouse basement, or a laundry room in a garden-apartment complex each get checked a little differently.
- Find the water shutoffs for the washer. In English basements they are sometimes in the upstairs unit.
- Inspect the fill hoses for cracks or bulges.
- Run a short wash and watch the drain. Note any leaks or loud thumping on spin.
- Pull out the dryer's lint screen and look behind the machine at the vent duct. A crushed foil duct or a duct that has come loose should go on your report.
- Run the dryer for ten minutes and check that air is coming out of the outside vent.
- In shared laundry rooms, ask who to tell when a machine breaks.
Find the Shutoffs and the Breaker Panel
Knowing where to cut water and power to an appliance turns a leak into a nuisance instead of a ceiling repair for the neighbor below.
- Locate the electrical panel and see whether the breakers are labeled for the range, dryer, dishwasher and refrigerator.
- Find the valve under the kitchen sink that feeds the dishwasher, and the one behind the fridge if it has an ice maker.
- In a rowhouse split into units, ask which shutoffs and which panel belong to you. They are not always inside your space.
Write It Up and Send It
- List each problem with the appliance, what you observed and the date.
- Attach the photos.
- Send it in writing through whatever channel the lease names, and keep a copy.
- Keep a short log of follow-up messages if repairs take time.
Do not hire your own repair technician for a landlord-supplied appliance without the landlord's written approval. Unauthorized repairs can create disputes over who pays.
For Landlords and Property Managers
The same list works in reverse during turnover. Testing appliances between tenants catches problems before the next lease starts, and a dated record helps if something is disputed later. WDC ProFix works with owners and managers on rowhouse units, condos and small apartment buildings across the District, and can coordinate access with tenants. Read more about refrigerator repair and our other services, or book online.
