
Miele Washer · Dupont Circle & Logan Circle
Miele Washer Repair in Dupont Circle & Logan Circle
In-home Miele washer diagnosis and repair in Dupont Circle & Logan Circle, DC. Same-day visits when the schedule allows.
Or book online and we'll get back to you to set a visit window.
Schedule Your Repair
Four quick steps. We'll confirm a visit window with you, and you'll get a written estimate before any work starts.
Service Type
What type of service do you need?
Or call us directly:
(703) 956-1511Repair Planned Around How Homes Here Are Built
A Miele washer that's acting up in Dupont Circle & Logan Circle usually has one of a handful of known faults, and most can be repaired in your home. In a rowhouse split into units, tell us which unit the appliance is in and whether the laundry is shared, since the shutoff valves are not always inside the unit that needs them. You get a written estimate before any work starts, and repairs carry a 90-day parts and 30-day labor warranty.
How It Works
Related Services
Washington, DC · Arlington · Alexandria
Ready to schedule your repair?
WDC ProFix Repair: independent, in-home appliance repair with a written estimate before any work starts.
What Dupont Circle & Logan Circle does to a washer
With laundry upstairs in a lot of condo conversions and new buildings here, a washer that walks during spin or drips at the door boot is more than a nuisance. Leveling, hoses and the pan underneath get checked on every visit.
Problems worth ruling out first on a washer in Dupont Circle & Logan Circle:
- Not Draining
- Leaking Water
- Not Filling with Water
- Filling Too Slowly
- Overfilling with Water
- Not Draining Completely
Known weak spots on Miele washers
- Drain error in the middle of a wash
- Detergent not dispensing from TwinDos
- Water seeping from the door seal
- Water inlet fault
Usually the problem with a Miele washer is a drain pump jammed by coins or hair clips, TwinDos cartridges or dosing pumps that stop feeding, a torn or worn door boot, or scale on the inlet valve and its screen. The symptoms that lead to a booking include drain error in the middle of a wash, detergent not dispensing from TwinDos, and water seeping from the door seal. A Miele washer that stops with a drain code almost always has something lodged in the pump filter behind the small front flap; lay a towel down before you unscrew it, because water will come out. If the drum takes ages to fill, check the screens where the hoses connect; scale and grit collect there.
Read the full Miele washer repair guide, with common questions →